OBD2 For Renault COM PSA-COM for Peugeot/for Citroen Replacement of Lexia-3 PP2000 PSA COM Bluetooth Diagnostic&Programming Tool
PSA-COM is a diagnostic program for Peugeot/Citroen vehicles. It can access to various electronic control units (ECUs) such as Engine, Gearbox, ABS, Airbag/SRS etc. and also can display identification, read and clear fault code memory, display and record measured values and perform actuator tests.
PSACOM BT PSA-COM Bluetooth Diagnostic program for Peugeot/Citroen
PSACOM Bluetooth is diagnostic tool for Peugeot/Citroen, dealer level diagnostic and programming advanced device, it is able to communicate with Bluetooth.
PSACOM BT PSA-COM Hardware:
Our OBD2 to USB PSA-COM interface contains 8x ISO9141 K-Line, 1x ISO9141 L-Line, CAN-BUS and analog measurement circuits.
PSA-COM Bluetooth Compatible Protocols:ISO15765, PSA2000, Bosch KW71 and PSA2.
Operation System (OS):
PSA-COM Bluetooth diagnostic interface is compatible with Windows xp/ win 7 32 bit or Linux and Mac OS/X (using Wine emulation)
Multi-language Available: Arabic, Croatian, Czech, Danish, Dutch, English (United States), Finnish, French (Standard), German,
Greek, Hebrew, Hungarian, Italian, Polish, Portuguese (Brazilian), Russian, Serbian (Cyrillic), Spanish, Turkish
PSACOM BT PSA-COM Features:
Fully multiplexed all-in-one Bluetooth interface
Automatic ECU recognition
Automatic vehicle scan
ECU Identification : – finds all the available ECUs in the car by pressing the single button.
Bluetooth – wireless connectivity to your Windows laptop or tablet
Fault code (DTC) reading
Fault code clearing, with the ability to store DTC vehicle history forever
Freeze frame reading
Measured vaules / live data Live data recording, fully dynamic with graphing of up to 6 data streams at a time,
recording and other manipulations Diagnostic protocol printing
Actuator tests , test components via direct ECU access
Special Functions - perform dealer level high-end programming/coding such as:
Key programming
Service reset
DPF (Diesel Particulate Filter) regeneration
EGR (Exhaust Gas Recirculation) self-test
Airbag programming
Injector programming
Power Steering calibration
ECU replacement
Car configurations
All 10 modes of OBDII test for a complete diagnosis via PSA COM :
Reading Codes:Show the detailed description of the Diagnostic Trouble Code (DTCs)
Erasing Codes & Reset:Turns off Check Engine Light (MIL), clears codes and resets monitors.
Data Stream:Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
I/M Readiness Status:Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
Read Live Data Stream:Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
View Freeze Frame Data:Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
O2 Sensor Test:Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
On-Board Monitor Test:Retrieves and displays test results for emission-related powertrain components and systems.
Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
Component Test:Certain vehicle components can be actuated by commands sent from the scanner to test their operability
for Renau-lt-COM Bluetooth is dealer level diagnostic and programming advanced device for Ren-ault vehicles. It can access to various electronic control units (ECUs) such as Engine, Gearbox, ABS, Airbag/SRS. It can perform these functions including display identification, read and clear fault code memory, display and record measured values and perform actuator tests
Notice:
1. same function with for R-enault can clip which is with the Golden clip or full chip but cheaper than them,this product canmake reprogramming.
2. with Bluetooth
New for Ren-ault-COM Bluetooth Diagnostic Tool For Ren-ault Vehicles
fro Rena-ult-COM Bluetooth is dealer level diagnostic and programming advanced device for Ren-ault vehicles. It can access to various electronic control units (ECUs) such as Engine, Gearbox, ABS, Airbag/SRS. It can display identification, read and clear fault code memory, display and record measured values and perform actuator tests.
for Rena-ult-COM Hardware:
Our OBD2 to Ren-ault-COM interface contains eight piceses of ISO9141 K-Line, one piece of ISO9141 L-Line, CAN-BUS and analog measurement circuits.
Operation System (OS): Re-nault-COM Bluetooth diagnostic interface is compatible with Windows 2000/XP
Multi-language Available:
Arabic, Croatian, Czech, Danish, Dutch, English (United States), Finnish, French (Standard), German, Greek, Hebrew,
Hungarian, Italian, Polish, Portuguese (Brazilian),Romanian, Russian, Serbian (Cyrillic), Spanish,Turkish
For Ren-ault-COM Features:
Fully multiplexed all-in-one Bluetooth interface
Automatic ECU recognition
Automatic vehicle scan
ECU Identification: – finds all the available ECUs in the car by pressing the single button
Bluetooth – wireless connectivity to your Windows laptop or tablet
Fault code (DTC) reading
Fault code clearing, with the ability to store DTC vehicle history forever
Freeze frame reading
Measured values / live data Live data recording, fully dynamic with graphing of up to 6 data streams at a time, recording and other manipulations
Diagnostic protocol printing
Actuator tests, test components via direct ECU access
For Ren-ault-COM Special Functions - perform dealer level high-end programming/coding such as:
Key programming
Service reset
DPF (Diesel Particulate Filter) regeneration
EGR (Exhaust Gas Recirculation) self-test
Airbag programming
Injector programming
Power Steering calibration
ECU replacement
Car configurations
Package Includes:
1pc x New For Ren-ault-COM Bluetooth Diagnostic Tool for R-enault
Where is the OBD Interface?
